Hello friends Summarized! Have you ever had a problem when your car is hard to start even though you have started it many times? If so, most likely your car battery is having problems. A car battery can run out or fail for various reasons, for example because it is old, rarely used, or does not match the capacity of the car. Well, if you experience this problem, there is a solution you can try, namely the car battery jumper .
This method is a way of supplying electricity from another source to the problematic car battery so that it can restart. Of course, this method must be done carefully and correctly so as not to pose a greater risk.
Curious about the correct and safe way to jump a car battery? Come on, see the full review below!
Before doing a car battery jumper, there are a number of things you need to prepare first. The following is the list:
Donor battery . The donor battery is the battery that will be the source of electricity for the problem battery. The donor battery can come from another car or a spare battery that is still in good condition. Make sure the donor battery has the same voltage as the problem battery, usually 12V.
Jumper cables . Jumper cables are the cables used to connect the donor battery to the problematic battery. Jumper wires are usually red and black with clamps on both ends. Choose a jumper cable that matches the size and type of your car battery.
Gloves . Gloves are useful for protecting your hands from electric shock or chemicals that may be in the battery. Use thick, impermeable gloves.
After all the preparations are complete, you can start jumping the car battery with the following steps:
Bring the car closer to the donor battery .
Position the car with the donor battery facing each other or parallel with enough distance for the jumper cables to reach. Make sure both cars are off and not moving.
Open the hood of the car and see the position of the battery .
Open the hoods of both cars and look for the position of the battery in them. Note the positive (+) and negative (-) terminals of each battery. Usually the positive terminal pole is red and the negative terminal pole is black.
Connect the jumper cable to the battery .
Take the red jumper cable and connect the clamp to the positive (+) terminal of the donor battery. Then connect the other end to the positive (+) terminal of the problematic battery. Next, take the black jumper cable and connect the clamp to the negative (-) terminal of the donor battery. Then connect the other end to the problematic car frame or chassis (not to the negative (-) battery terminal).
Start the car engine with the donor battery .
After all the cables are connected properly, start the car engine with the donor battery and step on the gas until the engine speed reaches 1000 rpm. Let the engine run for a few minutes to allow electricity to flow to the problematic battery.
Try starting the car with the problematic battery .
After a few minutes, try starting the car with the problematic battery. If the car can start, it means the jumper is successful. If not, repeat steps four and five until the car can start.
Remove the jumper cables carefully .
If the car can start, turn off the car engine with the donor battery and remove the jumper cables in the reverse order from when installing them. Starting from the black cable connected to the frame or chassis, then the black cable connected to the negative (-) terminal of the donor battery, then the red cable connected to the positive (+) terminal of the problematic battery, and finally the red cable connected to the pole positive (+) terminal of the donor battery.
Car Battery Jumper Tips
The following are some tips that you can follow when jumping a car battery to make it safer and more effective:
Do not touch the battery terminal poles with bare hands or other metal objects as this could cause an electric shock or spark.
Do not jump a car battery in a wet or humid place as this may increase the risk of electric shock.
Do not jump a car battery if the battery is damaged, punctured, or ruptured because this could cause an explosion or fire.
Do not use jumper wires that are damaged, torn, or thin as this could reduce the power supply or cause a spark.
Do not allow jumper wires to come into contact with other engine parts as this could damage electronic components or cause a spark.
Conclusion
The car battery jumper method is a way to get electricity from another source to the problematic car battery so that it can restart. This method must be done carefully and correctly so as not to cause a greater risk. You need to prepare a donor battery, jumper cables, and gloves before jumping a car battery. You also need to follow the steps and car battery jumper tips described above.
Thus a review of how to jump the car battery that is correct and safe. Hopefully this article is useful and helps you solve your car battery problem. If you have questions or feedback regarding this article, please write in the comments column below. Thanks for reading!