How to set up the Multi Joker AC Remote RM99 ID

If you have a multi AC with a Joker RM99 ID remote, you may experience difficulty operating the remote control. Even though it looks complicated, actually setting up the remote control can be done easily. In this article, we will provide a complete guide on how to set up the Joker RM99 ID multi AC remote.

Daftar isi

Preparation before setting up the Multi Joker AC Remote RM99 ID

Before starting to set up the multi Joker RM99 ID remote AC, make sure you have prepared the equipment and follow these steps:

1. Check Battery

Make sure your remote control batteries are working properly and installed properly. You can also replace the battery with a new one if needed.

2. Make sure the AC is Off

Make sure the air conditioner is off before starting to adjust the remote control.

3. Prepare the Multi Joker AC Remote Code RM99 ID

Make sure you have the correct remote control code for your AC multi Joker RM99 ID. This code can be found in your air conditioner’s user manual or can be found online.

4. Place the Remote Control Near the AC

Make sure the remote control is within the range of the AC. Avoid obstructions between the remote control and air conditioner to avoid signal transmission failure.

Steps for setting up the Multi Joker AC Remote RM99 ID

how to set remote ac multi joker rm99 id

After preparing the equipment and following the preparation steps, you can follow these steps to set up the Joker RM99 ID multi AC remote:

1. Turn off the air conditioner

Make sure the air conditioner is off before starting the remote control setting.

2. Press the “Set” Button on the Remote Control

Find the “Set” button on your remote control and press it until the indicator light comes on.

3. Enter the Multi Joker AC Remote Code RM99 ID

After the indicator light is on, enter the correct remote control code for your AC Multi Joker RM99 ID. Press the “Set” button again to save the code.

4. Press the “On/Off” Button on the Remote Control

After saving the remote control code, press the “On/Off” button to turn on the air conditioner. Your air conditioner should work properly after the remote control is set correctly.

5. Remote Control Test

Remote control test by changing temperature and AC mode. Make sure all remote control buttons work properly.

6. Done

If the remote control is working properly, the remote control setting is complete.

Tips

Here are some tips that can help you when setting up the Joker RM99 ID multi AC remote:

- Make sure the remote is close enough to the air conditioner for the signal to be received properly
- Do not press the button excessively, this may damage the remote and air conditioner
- Read the manual carefully before setting so you don’t enter the AC code incorrectly

Tips for caring for the Joker RM99 ID multi AC remote

Here are some tips for caring for the Joker RM99 ID multi AC remote:

- Clean the remote regularly. Make sure the remote is always clean and protected from dust and dirt. You can clean it using a soft cloth or tissue that has been moistened with a little water or alcohol.
- Keep the remote away from heat sources. Do not place the AC remote near a heat source such as direct sunlight or overly bright lights. This can affect the performance of the remote and even damage it.
- Use a good quality battery and replace it regularly. Make sure the batteries used are of good quality and replace them regularly to avoid damage to the remote.
- Don’t press the button too hard. If you press the button too hard, it may damage the remote. Therefore, make sure you press the button gently and carefully.
- Keep the remote in a safe place. Do not place the AC remote where it can be easily dropped or stepped on, as this may damage the remote and cause even more serious damage.

By taking good care of the Joker RM99 ID multi AC remote, you can ensure optimal performance and increase its lifespan.

Conclusion

Using the Joker RM99 ID multi AC remote can greatly facilitate setting the room temperature according to our needs. By following the steps described above, you can easily set up the AC remote without experiencing any more difficulties in adjusting the AC temperature.